Description
For one of our biggest clients from the wind industry we are searching for 2 Electrical Test Engineers (one specializing on the electrical components and one specializing on the generator and converter of the WTG) to fulfil the following activities:
To design and define the electrical tests to be done at the Wind-turbine’s subsystem within the Validation and Certification Plans of the Wind-turbine Product. Elaboration of the Test Specifications.
To acquire (purchase or internal development) or adapt those tools and equipment required for the execution of the tests.
To execute the electrical tests at Wind-turbine’s subsystem level according to the Validation and Certification Plan of the Wind-turbine Product. Coordination of all concurrent activities: procurement, assembly, instrumentation, adjustments and Start-up of prototypes, test execution and reporting of results and events.
To supervise those tests carried out by external laboratories, (accredited or not).
To ensure that all concurrent activities associated to a certain test have been assessed from the Health and Safety and Environmental points of view so the Risk Assessment is at disposal of everybody. To ensure that the execution of these activities is done in compliance with the Control Plan designed on the basis of the mentioned Risk Assessment.
To ensure the compliance of Environmental requirements that might be imposed to the test activity.
To analyse and report the results of the tests. Elaboration of the Test Report.
Information Technologies:
Primavera, Windchill, MS-Office.
Location:
Northern Germany
Duration:
01/01/16 - 31/12/16
40 hours a week
Requirements and technical knowledge:
Education: Industrial Engineer (Electrics, Electronics & Control).
At least 3-5 years working experience in that field.
Fluent English skills, good German skills.
Specification and usage of test instrumentation: sensors (current and voltage probes, accelerometers, pressure, temperature, etc.), signal converters, data acquisition systems).
Test tooling specification and development.
Assembly procedures. Electrical schemes deep understanding.
Measurement and control of lengths, angles, tolerances, adjustments.
Data Analysis Software (excel, visual basic, matlab, famos, diadem, C++, etc.).
Time and frequency signal analysis.
Measurement Uncertainty Evaluation.
Knowledge on functional requirements of typical systems as follows: Generators, power converters, MV switch gears, transformers, motors/gears.
If you feel suitable for this position please upload your CV with at least two references and your desired hourly rate. In case you can recommend someone else for that position feel free to do so and forward the project opportunity to your network.
Click the link below to apply:
http://www.earthstaff.com/job-details/oQiRgQJKR__E=
